|
|
These brake ducts are made from aluminum and are easy to install. Simply use a 3" hole saw to drill a hole, install the duct into the hole, mark the rivet holes and drill, rivet the duct into place and connect the brake duct hose. These aluminum ducts allow the brake hose to be attached securely with hose clamps unlike the plastic ducts that crush when the clamp is tightened and the hose comes off.
All associated parts and sub-assemblies for the above product are listed below:
| Part # | Description | Racer |
| 22015 | Brake Hose Connector with Mounting Kit | $11.65 |
| 16829 | Brake Hose Connector-3" Tube Only | $10.40 |
| 15700 | Tab-Chassis-1/4" Hole | $1.90 |
| 22016 | Spacer Bushing-Brake Hose Connector | $3.05 |
| 22012 | Bolt-1/4-20 x 1 1/2"-SHCS | $0.55 |
| 14262 | Lock Nut-1/4-20 | $0.40 |
| 22009 | Hose Clamp-3" | $2.30 |
|
|
|